The H-Frame Hydraulic Press in This Range: Y1H
The Y1H is the heavy closed-frame series of the hydraulic range: a single-piece double-column or four-column welded steel structure — or a full steel plate welded split-type structure — published at 1,000 to 16,000 kN nominal force across ten models (Y1H-100 to Y1H-1600). Daylight runs 900 to 2,000 mm and stroke 700 to 1,200 mm. This is the hydraulic series for deep drawing, cold extrusion and powder compaction at production scale, and the manufacturer's page lists the work in full: stretching, bending, flanging, cold extrusion, blanking, correcting, pressing, and the pressing and forming of powder, abrasive, plastic products and insulation materials.
| Series | Frame | Nominal force | Daylight | Stroke |
|---|---|---|---|---|
| Y1H | H-frame welded (single-piece or split type), hydraulic | 1,000-16,000 kN | 900-2,000 mm | 700-1,200 mm |
This page quotes the unambiguous rows of the manufacturer's published Y1H table — nominal force, daylight, stroke and cushion. In that published table the work-table sizes are printed in the row labelled return speed; selected published specifications from that table are published on the hydraulic press page, and per-model confirmation is part of the written quotation.
Published Construction, Guidance and Options
- Guidance: four-corner eight-sided adjustable guidance is standard, with an integral copper alloy slide plate on the slider movement side and an electric continuous cycle lubrication system.
- Hydraulics and control: integrated cartridge-valve design with the valve group on the upper beam; fixed stroke and fixed pressure processes with a pressure holding delay function; independent PLC control with centralized buttons, connectable to automation.
- Safety configuration, as published: a manual safety column and a light curtain on the operating side are standard; TDC pins, safety net, safety door and safety claw are optional.
- Cushion options: published cushion force and stroke from 300 kN & 200 mm (Y1H-100) to 4,000 kN & 350 mm (Y1H-1600), with a CNC hydraulic cushion and a segmented hydraulic cushion among the special designs.
- Special designs on the page: dual or multiple sliders, independent round guide pillars, multi-cylinder arrangements with each cylinder's pressure independently controlled, high-precision force or position control, worktable extension, reverse stretching, and mechanical or hydraulic balance devices.
Against the other hydraulic frames: the Y1C C-frame series trades the closed frame for three-sided access at 200-6,300 kN, and the Y1P four-post series covers the same force band in a three-beam pillar construction. The three-way comparison, with all published tables, is on the hydraulic press page.
Frequently Asked Questions
What is the largest H-frame hydraulic press here?
The Y1H-1600 at 16,000 kN nominal force, with 2,000 mm daylight and 1,200 mm stroke — the top of the manufacturer's hydraulic range.
What forming work is the Y1H documented for?
Stretching, bending, flanging, cold extrusion, blanking, correcting and pressing, plus pressing and forming of powder, abrasive, plastic products and insulation materials, per the manufacturer's page.
Is a die cushion available on the Y1H?
Yes — published cushion options run to 4,000 kN & 350 mm at the top model, and CNC and segmented hydraulic cushions are listed among the special designs. The cushion fitted to your order is confirmed in the quotation.
Why does this page not quote the Y1H work table size?
In the manufacturer's published table, the work-table sizes are printed in the row labelled return speed, so the row cannot be quoted unambiguously here. Selected specifications from the table are published on the hydraulic press page, and the figure for your model is confirmed in writing before order.
Send an Enquiry
Tell us the machine, your material and thickness, and the part you are forming. Tonnage, configuration and price are confirmed in the written quotation.